The following program related content is the vacuum chamber type helium leak detection system, which is specially designed for the leak detection of the expansion valve of the automobile air conditioner.

Product Introduction: Sensor automatic helium leak detection system, featuring high-precision automated testing, tracks minute leaks using helium. Leveraging advanced technology, it ensures products meet rigorous sealing standards. Widely applied in automotive manufacturing, it enhances product quality and reliability.

Product Introduction: According to the basic principle of helium leak detection, helium is used as a tracer gas to charge helium into the workpiece, and then the accuracy of workpiece leakage can be quickly and accurately determined by helium leak detector.

According to the basic leak detection principle of helium leak detection, helium gas is used as the tracer gas, and helium gas is filled into the test piece in the vacuum chamber, and then the leakage of the test piece can be quickly and accurately detected by the helium leak detector.

Product Principle:  Based on the basic principle of ammonia leak detection, helium is used as the tracer gas. Fill the vacuum chamber with helium, then evacuate the workpiece. The leak condition of the workpiece can be determined accurately and rapidly by the ammonia leak detector with high precision.

Product Introduction: This equipment is a helium leak detector for sealed welding of liquid injection holes in power batteries. With a full-flow architecture and efficient processes, it achieves high-precision and rapid leak detection, meeting the testing needs of different products.

Product introduction: The new energy suction gun type helium leak detection system is an advanced detection technology, specifically designed for the leak detection of new energy equipment. It adopts the suction gun type design, which is easy to operate and can quickly and precisely detect tiny leaks. This system uses helium as the tracer gas and is detected through a helium mass spectrometer leak detector. During the detection process, helium is charged into the device under inspection, and the operator uses the suction gun to scan the device. If there is a leak in the equipment, the leaked helium will be sucked into the leak detector by the suction gun, thus quickly and accurately determining the leak point. This leak detection system has a high degree of accuracy and reliability, which can ensure the safety and stability of new energy equipment, and improve the quality and performance of the equipment, which has important significance for the development of the new energy industry.

Product Introduction: This equipment uses helium to test the sealing of both sides of the battery end cover. Helium surrounds one end, and the detector captures leakage signals from the other end, enabling a rapid and accurate judgment of whether there is any leakage.

This equipment is used to detect the air tightness of the air spring assembly online.

Product introduction: The vacuum box type helium leak detection equipment is a kind of equipment specifically used to detect the leakage situation in the sealed system. Its working principle is to place the component to be detected in the vacuum box, and then use the vacuum pump to suck the inside of the box into a vacuum state. Next, helium gas is injected into the box. Because helium gas has extremely small molecule diameter and good permeability, it will enter the vacuum box through any existing leak points.

Basic principle: The equipment using helium as a tracer gas, the workpiece is placed in a vacuum chamber and filled with helium, and the leakage of the relay is judged quickly and accurately through the leak detector.