The 20N thrust probe is mainly used to check whether the live parts in the protection door are touched while the 1N thrust probe is mainly used to check whether the live parts in the protection door and the live parts with reinforced protective sockets are touched. They are used to test the anti-shock performance of the socket structure.

It is applied to verification of basic protection against human access to hazardous parts, and it is also for protection of fingers.

Verify that live parts or mechanical parts that prevent human access to the hazard are not touched.

It is used for inspection of protection against human access to hazardous parts and also used for inspection of protection against hand-held wires.

Used to check whether hazardous live parts in Class zero equipment or Class II equipment have been touched.

It is used for inspection to prevent the human body from touching dangerous parts, also used for protection inspection to prevent the back of the hand from being touched.

A test to prevent solid foreign objects with a diameter greater than 50mm from entering the equipment.

A test that verifies that the protective cover of an electrical outlet protects against access to hazardous live parts inside.

It is applied to verification of basic protection against human access to hazardous parts, and it is also for finger protection.

A test to prevent solid foreign objects with a diameter greater than 12.5mm from entering the equipment.

Used to verify the effect of fan guards against access to hazardous mechanical parts.