leave a message
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Product introduction:
The high-voltage electro-ceramic bushing vacuum oil filling system is a product specifically designed for oil filling in the electro-ceramic bushings of high-voltage electrical equipment. This system primarily uses the vacuum oil filling method to inject oil into the interior of the electro-ceramic bushing, thereby enhancing its insulation performance and mechanical strength, ensuring the safe and stable operation of the equipment.
The characteristic of this system is the adoption of the vacuum oil filling method, which can evenly inject the oil into the electro-ceramic bushing under relatively low pressure, avoiding the problems of bubbles and local oil deficiency that may arise from traditional oil filling methods. Simultaneously, this system can also perform drying treatment on the inside of the electro-ceramic bushing, further enhancing its insulation performance.
This system has a wide range of applications and is suitable for the oil filling of electro-ceramic bushings in various high-voltage electrical equipment, such as transformers, reactors, circuit breakers, etc. The use of this system can significantly increase the reliability and safety of high-voltage electrical equipment and extend the service life of the equipment.
In conclusion, the high-voltage electro-ceramic bushing vacuum oil filling system is an efficient and reliable oil filling product, which holds significant importance in enhancing the performance and reliability of high-voltage electrical equipment.
Certification :
Calibration Certificate(cost additional)Price :
NegotiableDelivery Time :
30 daysPayment Terms :
L/C, T/TBrand Name :
HCTEModel Number :
HCTE-VTE-010Detection standards:
(1) Chinese standards
GB/T 31142-2014 Technical specifications of high-voltage electro-ceramic bushings
GB/T 2900.10-2004 Electrical terminology - High-voltage switching equipment and control equipment
GB/T 7354-2004 Terminology of high-voltage test techniques
GB/T 16927-2011 High-voltage test techniques
DL/T 596-2005 Preventive test code for electrical equipment
(2) International standards
IEC 60060-1: 2011 High-voltage test techniques - Part 1: General test requirements
IEC 60529: 2013 Electrical installations of buildings - Part 1: General rules
IEC 61000-4-2: 2017 Electromagnetic compatibility - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
IEC 61000-4-3: 2017 Electromagnetic compatibility - Part 4-3: Testing and measurement techniques - Radio-frequency electromagnetic field radiation immunity test
IEC 61000-4-4: 2017 Electromagnetic compatibility - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
IEC 61000-4-5: 2017 Electromagnetic compatibility - Part 4-5: Testing and measurement techniques - Surge (impact) immunity test
IEC 61000-4-6: 2017 Electromagnetic compatibility - Part 4-6: Testing and measurement techniques - Conducted disturbance induced by radio-frequency fields immunity test
IEC 61000-4-8: 2017 Electromagnetic compatibility - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test
IEC 61355-3:2015 Safety of household and similar electrical appliances, electric tools and similar apparatus - Part 3: Limits and test methods for resistance to radio-frequency disturbance
Detection items:
Vacuum degree detection: To examine the performance of the system in a vacuum environment, ensuring that it meets the preset standards.
Temperature detection: To detect the temperature of the system during the heating process, making sure it reaches the preset temperature range.
Oil quality detection: To conduct quality testing on the injected oil, including indicators such as the viscosity, acidity and alkalinity, and water content, in order to ensure that the oil quality meets the requirements.
Insulation performance detection: To carry out electrical performance testing on the electro-ceramic bushing, including indicators such as insulation resistance and dielectric loss, in order to evaluate the insulation performance of the oil.
Mechanical performance detection: To perform mechanical performance testing on the electro-ceramic bushing, including indicators such as tensile strength and bending performance, to ensure that it meets the mechanical performance requirements.
Appearance quality detection: To examine the appearance quality of the electro-ceramic bushing, including indicators such as surface quality and dimensions, to ensure that it meets the appearance requirements.
Test objects:
Vacuum degree test: To test the performance of the system in a vacuum environment, including the stability and uniformity of the vacuum degree, to ensure that the oil can be evenly heated and injected in the vacuum environment.
Temperature test: To test the temperature of the system during the heating process, including the stability and uniformity of the temperature, to ensure that the oil can reach the preset temperature range.
Oil quality test: To conduct quality detection on the injected oil, including indicators such as the viscosity, acidity and alkalinity, and water content, to ensure that the oil quality meets the requirements.
Insulation performance test: To carry out electrical performance testing on the electro-ceramic bushing, including indicators such as insulation resistance and dielectric loss, to evaluate the insulation performance of the oil.
Mechanical performance test: To perform mechanical performance testing on the electro-ceramic bushing, including indicators such as tensile strength and bending performance, to ensure that it meets the mechanical performance requirements.
Appearance quality test: To detect the appearance quality of the electro-ceramic bushing, including surface quality, dimensions, and other indicators, to ensure that it meets the appearance requirements.
Safety protection test: To test the safety protection function of the system, including overload protection, leakage protection, etc., to ensure the safety of the operators.
Control system test: To test the intelligent control system of the system, including the automatic control and regulation functions of temperature, pressure, vacuum degree and other parameters, to ensure the stability and accuracy of the system.
Hot Tags :
We Provide you with industry leading test equiment
Address : 10 anson road #27-18 international plaza Singapore
E-mail : sales@isoautotest.com
